1 / 1
Immunohistochemistry Staining Chamber for Medical Research (8 Slide Holder) — image 1

Immunohistochemistry Staining Chamber for Medical Research (8 Slide Holder)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€6.20 – €7.57 net (excluding VAT)

For file: ihccase_lid_015mm_petg_mini_7h10m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €6.89 excluding VAT (range midpoint).

Weight reported by the author
86 g
Print time reported by the author
7.17 hr
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

--UPDATE-- I realized in my initial upload I only included the latest version of the lid, which has dividers between…

Rating
5 / 5
Likes
26
Downloads
280
Makes
1
Views
1,886
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

--UPDATE--
I realized in my initial upload I only included the latest version of the lid, which has dividers between the samples holders. I have now included the original flat lid that has no dividers in case this is useful for you.

This chamber is used to perform immunohistochemistry. It holds 8 glass slides horizontally so that antibodies or other solutions can incubate on the tissue. This provides a means to stain for an endless number of markers and is an essential piece of equipment that I use every day in the lab.

I designed this since many of the incubation chambers I have found online were inadequate or not durable enough for regular lab use. Additionally, this was designed so that it fits on the prusa mini print bed.

I strongly recommend printing in PETG since this can be wiped down and cleaned with lab cleaning reagents such as 70% ethanol.

Assembly:

The hinge for the lid and the bottom can be secured by simply inserting a 1.75 mm filament through the entire length of the hinge. It can be held in place by simply melting the ends of the filament.

Please check out my other designs including:

Tags