Eryone Thinker SE Direct Drive Mod

This is a complete redesign of the original idea from shahan posted here https://www.thingiverse.com/thing:4232058

Direct Drive Mod for the Eryone Thinker SE 3D printer

This mod is conceived to be a plug and play mod, without changing any original component.

PTFE offset is calculated for the original extruder.

You just need to buy or create an extension cable for the extruder motor.

If your printer is equipped with a BLTouch, print the bltouch part also.

Please note: the BLTouch mount almost reset the Z-offset, so calibrate the Z-offset again before printing, otherwise the nozzle crashes into the bed!

OPTIONAL PARTS

Extruder Lever

A better extruder lever has been added to the package. The lever helps to guide flexible filaments, leaving almost no gap.

It comes in two versions: one for adding a heat-set insert for the spring screw and one with just the hole. Print the normal one if in doubt.

This is a complete redesign, based on the original idea by xenomorphdelombre

Thanks to Vultus5 for the suggestion!

Hotend fix

PTFE fix for the hotend, highly recommended Eryone Thinker S hotend fix

Come to Eryone 3D Italia Facebook Group for support and more mods!

Print Settings

Printer:

Eryone Thinker SE

Rafts:

Supports:

Yes

Resolution:

Infill:

40-50% (support) - 20% (bltouch)

Filament:

Eryone PLA

Grey

Notes:

Category: 3D Printer Extruders