Geometric Pendant
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.58 – €0.71 net (excluding VAT)
For file: Geometric Pendant_0.15mm_PLA_MINI_47m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.64 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 47.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A geometric pendant based off of a friend's necklace.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 64
- Makes
- 1
- Views
- 308
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial
A geometric pendant, intended for use in jewelry.
A friend of mine came to work with a beautiful necklace. I loved the profile/geometry of it, I'm a big fan of this kind of ‘simple facets but strange angles’ work, and I immediately got to designing a piece inspired by it - and this is the result!
As a basic use, this can be printed as-is, and threaded with a necklace chain. Since I don't often wear necklaces, I'm considering making a variation that can be used as a lapel pin - if I do, I'll be sure to upload a variation for it.
As always, please do share photos of your makes - and any notes you have for improvements/criticisms to improve the design.
I'm still working on my first two prints of it - I'll post my makes as soon as they're done. I want to create a brass/gold one, and a gunmetal/dark chrome one. My print/post-processing plan:
I'm printed two of these using PLA. Sanding regime starts at 80grit, working up to 1000grit, with a little filler-primer to help.
Airbrushing one with a brown/red paint, then a few layers of high-gloss sealant. Then airbrushing with a few thin layers of brass paint. Finally finishing with another layer or two of high-gloss sealant.
Airbrushing the other with a high-gloss black paint, then layering on powdered graphite. Finishing with a layer or two of a high-gloss sealant.