1 / 5
Shower Caddy Hook
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An all-in-one shower caddy hook to support shower caddies that do not fit shower heads.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 57
- Makes
- 1
- Views
- 919
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Public Domain
An all-in-one shower caddy hook to support shower caddies that do not fit shower heads. The hook also has two towel spots to hang wet/dry towels. The structure was designed for the weight to be placed on top of the glass walls of the shower.
- Best Print Orientation has been included
- Print Settings
- Material: PLA+
- Layers: 0.2mm
- Infill: 60% - Gyroid
- Walls: 10 Walls / Floors
- Supports: Snug / 0.2mm Z Gap
Assembly Required:
- M4 Hex Nuts
- M4 Bolts Lengths
- 1 x 35mm
- 2 x 40mm
Glass pads have been included but may vary based on shower setup.