DIY TL smoother box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ordered some tl smoothers to test from Aliexpress, but while waiting for them to arrive, I thought that why not build…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 451
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
Ordered some tl smoothers to test from Aliexpress, but while waiting for them to arrive, I thought that why not build one as I have the proper diodes. As it seemed to work for what I wanted (fixing DRV8825 jerky slow movements), I decided to make a box for it.
The circuit I used is from here: http://cabristor.blogspot.com/2015/02/drv8825-missing-steps.html?m=1
You'll need following items to build this:
- 4 pin header
- 8 1N5404 diodes
- some wire
- 4 M3 6mm screws
I printed mine with PolyMax PLA as I had it loaded on my printer and it seems to work fine. The diodes do get bit hot, so if there's no air circulation, it might be a good idea to use PETG or ABS.
OpenSCAD source is here: https://github.com/spegelius/3DModels/tree/master/TL_smoother
Category: 3D Printer Accessories