Apple Watch S7 Macintosh 128k charging stand
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.31 – €2.83 net (excluding VAT)
For file: apple watch macintosh stand_0.6n_0.35mm_PLA_MK3S_1h40m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.57 excluding VAT (range midpoint).
- Weight reported by the author
- 51 g
- Print time reported by the author
- 1.67 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
charging stand reminiscent of a Macintosh 128k for the Apple Watch Series 7 (45mm) using the included charger
- Rating
- 4.769 / 5
- Likes
- 460
- Downloads
- 3,170
- Makes
- 41
- Views
- 12,578
- Reviews
- 39
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Share Alike
Inspired by this 3D Print by user option8 in 2015.
I didn't like the 2 part construction and it did not fit my watch so I decided to update the design. Being a single piece means it feels much heavier and more solid when handling.
There's also this product by Elago with a very similar design; the entire thing is made of silicone resulting in a soft and flexible stand.
All models pictured were printed with a 0.6mm nozzle and 0.35mm layer heights. eSun PLA+ “bone white” is a very fitting material for this print; the semi translucent nature of this material does a superb job of hiding the layer lines.
When Slicing its a good idea to add either seam blockers and/or enforcers to make sure the front/sides are clean and the seam hides away where the charging puck will be inserted. Don't forget to hide the Z-seams on the inside of the vertical screen bezels. (as pictured)
Other than that just print the model right side up and with supports underneath the chin. Printing upside down is entirely possible too. I included a gcode for the MK3S+Prusament PLA and a 0.6mm nozzle but I highly recommend you slice it yourself.
In the future I want to decrease the overhang angle on the chin so that hopefully supports won't be necessary anymore.