RC2 flexible strap
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.90 – €1.10 net (excluding VAT)
For file: covid19-strap-flex-6.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.00 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 1.21 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Designed in TinkerCad Adjustable using holes. Printed with Overture TPU. Use Vase mode. Total print time is 1hr.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 56
- Makes
- 0
- Views
- 598
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Public Domain
Designed in TinkerCad
Adjustable using holes.
Printed with Overture TPU. Use Vase mode. Total print time is 1hr. 18 min can be reduced to approx. 38 min using TUNE>Speed 150% after first few layers.
Looking for suggestions on design but especially "stringing" issue with increased speed.
Print instructions
Attached G Code
Vase Mode
0% infill
Fans Off
.4mm nozzle
NOTE: Scale in PrusaSlicer to reduce size slightly to fit build surface.