1 / 2
Replacement temples for Hackett Greenwich glasses
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement temples for Hackett Greenwich glasses
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 129
- Makes
- 0
- Views
- 784
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Men
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My glasses broke so I designed new temples for them. Far from a bulletproof design, but it does the job.
Printing is not easy because the hole is very small. I recommend the following settings with PETG:
- Print one by one to minimize nozzle travel on top layers
- Reduce speed for last layers (add custom gcode e.g.
M220 S20for 20%) - Print without supports, with the wider side of the temple on the build plate
- Use a small nozzle. I managed to make it work with 0.6mm but I had to disable the new Arachne generator as it was introducing artifacts
- Enable ironing if you'd like