Rhino II Dovetail Adapter (PYRM)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A work in progress 3d printed replacement slider for the Rhino II NVG mount to convert it to the Dovetail interface.
- Rating
- 5 / 5
- Likes
- 43
- Downloads
- 617
- Makes
- 2
- Views
- 3,829
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A prototype 3d printed replacment slider for the Rhino " NVG mount to convert it to the Dovetail interface.
V2 included with a reworked pocket for the nut, which holds the screw in place that secures the mount.
This should prevent the nut from free spinning.
after removing the original bayonet mount this should slide right on and maybe require sliding it a few times to make it move easily.
only non printed parts needed are:
-M2x20 mm screw
-M3 screw with at least 13mm threads
-a ballpoint pen spring cut in half
-3x M3 nuts