1 / 7
Garmin Forerunner 10 watch USB dock
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The old watch dock connector had a broken contact pin, so i made a new dock. I used 1mm wide pogo pins which i…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 180
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
The old watch dock connector had a broken contact pin, so i made a new dock.
I used 1mm wide pogo pins which i soldered to an old USB cable.
The back plate can be fixed by glue or a small screw.
I printed it in ABS and this might be important because the hook on one side has to have a little bit of flex
Print Settings
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
20%
Filament: eSun ABS grey
Category: Sport & Outdoors