1 / 18
Honda Africa Twin 1000 CRF Rear brake fluid reservoir guard (3d Printer and Laser cut)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
You can buy these guard from the UK (34€ + delivery), but it´s very expensive. So I made my own ^^ . The 3d model was…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 110
- Makes
- 1
- Views
- 975
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
You can buy these guard from the UK (34€ + delivery), but it´s very expensive.
So I made my own ^^ .
The 3d model was only the prototyp (after two paper modells), that it fits propertly. I make it a bit stronger, so you can use it instead of a metall guard (dxf).
The laser cut protection guard is still in work. I upload a photo when it's done.
Print Settings
Printer:
i3 Prusa
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.15
Infill:
80%
Post-Printing
-some sanding
-Aceton bath??
Category: Automotive