1 / 4
Canon FD to RF adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Canon FD to RF adapter
- Rating
- 5 / 5
- Likes
- 50
- Downloads
- 479
- Makes
- 3
- Views
- 2,679
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Canon FD to RF adapter. Printed in two parts. Wet sand with 400 grit so that you get exactly 22mm height. 3x10mm M2 screws and glue in place when all fits well. Printed in CF-PETG (Atomic filament). 3 perimeter 5 bottom and 7 top layers 0.15 mm layer height, 0.4mm nozzle with support for overhangs.
Make sure lenses are not set to automatic. Put the lens on with the red dot at 2 o'clock turn to 12 and press down and turn to the right to lock in place. This will engage the aperture lever correctly.