1 / 1
Two Color Inlay w/ 1 Extruder Small Letter Test Print (No MMU)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small test print for dialing in printing with two colors on one layer without MMU.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 144
- Makes
- 3
- Views
- 1,521
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Public Domain
Maybe you've seen CHEP's video for printing a 2 color inlay using Z Hop and weren't sure how to do it with a Prusa (since if you follow this method, the Prusa will try to ABL while half the print is still on the bed) or you're trying to dial in printing in small letters. This should help!
Printer Settings
- General
- Extruders: 2 (or more for more colors)
- Extruder 1 (or whichever extruder(s) use the first layer but aren't the first extruder to place filament)
- Lift Z: 0.3 (layer height + 0.1mm)
- Lift z enforcement: Enforce on first layer
- Custom G-Code
- Tool change G-code: M600
Print Settings
- Skirt and Brim
- Loops: Set to # of layers that have different colors (if 2 colors goes 0.4mm up and you're printing at 0.2mm layer height, use 3 loops)
- Skirt height: Same as above
- Multiple extruders
- Wipe tower: disable
Slicer Setup
- Import
BlackLetterTest.stlinto PrusaSlicer - Right-click on it in the right pane and select "Add Part > Load"
- Select
WhiteLetterTest.stl - Ensure the component (and parts) are flipped so that the appropriate side is face-down
- Ensure settings above are used
- Right click each part in the right pane and select "Change extruder" and select the appropriate one
- Inspect the "Gcode preview" and note which color prints first
- Export the
.stland then edit it with a text editor - Remove the first
M600command if your printer is already set with the appropriate first color - Start printing and swap colors as necessary