Phone wall mount variations
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Phone wall mount variations.
- Rating
- 4.667 / 5
- Likes
- 83
- Downloads
- 1,352
- Makes
- 4
- Views
- 5,465
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Share Alike
Phone wall mount variations.
There are 5 models (Simple and “Complex”) and a dummy phone if you want to doublecheck dimensions by using a simple phone model.
Small/Original
I used it for a 158.3 x 73.3 x 8.2mm phone in a soft case so the phone and the case are around 162 x 78 x 10mm.
Updates - 07/29/2026:
- The width remains 82 mm in the new (*****-Large) versions, while the height has been increased from 11.6 mm to 15.6 mm to accommodate larger phones.
- Flat versions have been added for all smaller and larger variants, without the spacer on the back.
Attachments:
A drawing with a few dimensions (please check the attached pdf) if you want to double-check something.
.STEP file if you want to change something.
.3MF files for 3D printing.
Print settings:
Print it from the bottom to the top ( as pictured in Prusa Slicer screenshot ), this way support is not required. Nothing special.
Infill: My recommendation is around 25-30% infill but it depends on your material/printer.
I used PLA+ 25% without any problems (PRUSA Mini)