Axle extension for Raptor 1:10 RC Truck convert to RC Ghost Trap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Axle extensions to allow the body of Ghostbusters Ghost Trap to clear wheels when turning. Slots over the top of the…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 23
- Makes
- 0
- Views
- 224
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Axle extensions to allow the body of Ghostbusters Ghost Trap to clear wheels when turning.
Slots over the top of the existing axles. Take the wheels off by squeezing the two prongs in the hubs of the wheels together and pull.
This conversion allows the cheap Hot Wheels Bone Shaker RC Monster Truck to be used as an RC base.
Friction fit the axels over the top of the existing ones, you will need to push really hard to get them on, but they won't move once on. 3mm screws and washers to attach wheels to the hubs.
Back have hex to transfer power to wheels, front are rounded and free spin (don't need to over tighten them).
Can be printed without supports with the smaller diameter end on the build plate with a big brim.
Category: R/C Vehicles
