1 / 2
Vase/Spiral mode espresso knock box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fast to print Vase/Spiral mode espresso knock box, with 2 parts
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 122
- Makes
- 3
- Views
- 1,235
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- GNU General Public License v3.0
Fast to print and low material usage, espresso ground knock box. Splits the model into a vase/spiral mode printed box to store the grounds, and a normally printed bar for knocking the portafilter on.
Print settings
-Knock_box(spiral, vase mod)
- Use vase/spiral mode to print this
- make sure it is a hollow box with a closed base in the g code preview
- 1 mm extrusion width for strength
- you may need to adjust the temperature and speed to make sure the extruder can keep up
-knock_bar
- Normal print settings
- increase the amount of wall lines to increase strength (optional but recommended)
Assembly
Slide the two parts together and optionally glue them together
I would love to see your makes posted if you decided to make it!