Reggie The Robot - Print-In-Place
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Meet Reggie The Robot! - The loveable, print in place, fully jointed robot toy! Easy to print, has been tested down to…
- Rating
- 5 / 5
- Likes
- 34
- Downloads
- 197
- Makes
- 1
- Views
- 925
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Meet Reggie The Robot! - The loveable, print in place, fully jointed robot toy!
Easy to print, has been tested down to 60% scale but your printer has to be really dialed in for success.
80% Scale Takes Roughly - 1h:22m
100% Scale Takes Roughly - 2h:15m
Bear in mind 100% scale is still small! - 73mm from head to toe, so you may want to scale up to 200/300% at a 0.3 layer height, for a really robust Reggie.
I really hope you enjoy this design! It's taken a fair few iterations to get a reliable, robust print and I'm really happy with the end results.
Any questions, please comment and I'll reply asap :D
Have Fun!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: Various PLA+ Multiple
Notes:
A good first layer is essential. Make sure there are clear gaps around the joints, otherwise breaking them free can be tricky. If you struggle with this, raise your Z offset by 0.05mm And test again.
Green = 60% Scale Red/Yellow = 80% Scale - White = 100% Scale - Pink 200% Scale
80% Scale
Category: Model Robots