Modified Splitter Design for Ventilator
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.60 – €1.96 net (excluding VAT)
For file: splitter_22deg.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.78 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 2.13 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This splitter design is the modified version of "3D Printed Circuit Splitter and Flow Restriction Devices for Multiple…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 72
- Makes
- 0
- Views
- 492
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution
This splitter design is the modified version of "3D Printed Circuit Splitter and Flow Restriction Devices for Multiple Patient Lung Ventilation" by "Alexander Clarke".
In the original design, corner and sharp edge is present which in practice reduces the flow of fluid.
In this design I have tried to reduce the sharp edges are printed on same dimensions . This modified design is not yet tested on actual ventilator but in theory if shows some improvements.
Currently I have been working on different bifurcation angles i.e. 22, 45 and 60 degrees. The optimal angle can be found through experimental procedure.
Here 2 files are attached with 22 and 45 angle bifurcation.
None of this design is tested on patient.
Designers are appreciated to test these designs and modify for further improvements.
Thanks to Dr. Alexander Clarke , here is the link for the original file.
https://www.prusaprinters.org/prints/25808-3d-printed-circuit-splitter-and-flow-restriction-d
Email: [email protected]
Twitter: @heisenenergy