1 / 4
AtomRc Dolphin elevon
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
Atomrc Dolphin elevon
Three different types:
- Plane elevon, you need to glue in servo horn andduct tape elevon to main part of the wing
- plane elevon with place for connectors to the wing (use 16mmx28mm)
- With place for horns and connectors (see picture)
Print settings:
Polilite Pla:
Layer hight 0.2
Perimeters 1
Solid layers bottom 1, top-3
Infill rectilinear 7-10%
combine infill every 1 layer
Support for support enforcers only- paint it!
Speed:
Perimeters 35mms
infill perineters overlap 22%
Print temp 220 st.C
Bed 55 st.C
If you appreciate my work you can buy me a coffe ;)
https://www.buymeacoffee.com/bunkw420h