1 / 5
🔧 12mm Sink faucet wrench (kitchen/bathroom) — image 1
1 / 5

🔧 12mm Sink faucet wrench (kitchen/bathroom)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Wrench for easy tighting of faucet 12mm nut under the sink with long handle

Rating
5 / 5
Likes
90
Downloads
393
Makes
3
Views
1,682
Reviews
4

Updated at source:

Model information

Category
Tools
License
Creative Commons — Public Domain

Info:

  • wrench for badly accessible nuts under the sink
  • long handle (14cm)
  • wrench/nut 12mm 
  • for threaded rod up to 8,2mm (which fits inside the wrench middle hole)
  • remixed original (thx volkhen!), because i needed:
    • different nut size
    • longer handle
    • and when i was at it I changed inner shape as well (the hexa is needed only at the bottom, the rest can be round hole for the rod)
    • adjusted outside shape aswell

 

Print info:

  • i used PETG, but PLA could also work
  • i have used 4 perimeters, so the tube is completly from perimeters
  • lower nut section 50% infill, the rest 20%
    • but you may use less, I wanted to be sure, it will work perfectly :) 
  • easy print, i have printed it on 150% speed after first layer, so it is quicker than

Tags