1 / 3
SCUBA tank boot/base
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A boot/base for a SCUBA tank with a 7.25 in. or 184.2mm diameter.
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 199
- Makes
- 1
- Views
- 1,541
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
I wanted a boot/base that was soft as opposed to the commercially made ones that are mostly made of a hard plastic. This one is designed to fit snugly on a Catalina aluminum 80, 63 or 53 cu. ft. cylinder. All of which have a 7.25" in. dia.(184.2mm) flat base. It has ribbing around the perimeter and in the base to allow water to easily drain out.
I hope you find it useful and please rate/post your make.
Print instructions:
I used Overture TPU using a .8mm nozzle, 4 perimeters and 4 solid top and bottom layers.