Vallejo Paint Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a modular paint stand designed for Vallejo paints.
- Rating
- 5 / 5
- Likes
- 75
- Downloads
- 419
- Makes
- 10
- Views
- 2,863
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Features:
- Different versions of the parts so you can customize it for your needs.
- Relatively short print times.
- Assembly with little to no glue.
- Small overall size.
Before you start printing choose a Horizontal for how many paint tubes across you want for your stand (5 pictured above), and a Vertical for how high you want (3 pictured above).
You will need a Horizontal plate for each layer high you want and one corresponding Support. If built for 5 wide or less only 2 Verticals are needed, for 6 or greater you will need 3.
Note:
These parts have a nominal interlocking clearance of .10mm. This fit is intentionally a little tight. Due to this it is necessary for your printer to be properly calibrated for dimensional accuracy.
Assembly
All connections are press fit, but if they are loose use a few drops of super glue.