Configurable Filament Swatch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament swatch with 0.2mm stepped thickness, plus place for label.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 52
- Makes
- 2
- Views
- 424
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
Nothing fancy, just a standard filament swatch.
Dimensions are 30×80×2.2mm.
The upper area contains 10 thickness steps (0.2 to 2.0mm). Useful mostly for translucent materials.
The lower area contains a recessed space for either raised text or an adhesive label. The SCAD source resizes the text to fit (within reason). If the text is set to "", a shallower and slightly wider space for an adhesive label is generated instead.
The upper-left corner contains a 3.5mm hole for a 3mm bolt, a book ring or just a loop of filament.
Best to print at a 0.2mm layer height to maintain even steps.