Mag Flip Desk Toy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A magnetic spring desk toy!
- Rating
- 5 / 5
- Likes
- 69
- Downloads
- 137
- Makes
- 2
- Views
- 2,328
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Noncommercial
Fun with magnets! Three neodymium disc magnets are dropped in during printing.
Two 5/16" x 1/16" in the base, one 1/4" x 1/8" in the hammer. The magnets in the base need to be reversed polarity in order to “levitate” the hammer. The shaft is 2 mm stainless rod stock cut to 20 mm.
The “sliced” .3mf file includes two pause points for the magnets and one color change (optional).
No need for glue with a metal build plate. For glass or a non-ferrous surface, use a small drop of CA glue to keep the magnets from getting stuck to the print head.
https://www.kjmagnetics.com/proddetail.asp?prod=D42-N52
https://www.kjmagnetics.com/proddetail.asp?prod=D51-N52
https://www.amazon.com/VictorsHome-Stainless-Crafts-Helicopter-Airplane/dp/B0962RMLVJ/ref=sr_1_5