Slica box/dry box for Bambulab AMS
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
More desiccants for the AMS!
- Rating
- 4.86 / 5
- Likes
- 749
- Downloads
- 6,617
- Makes
- 112
- Views
- 31,789
- Reviews
- 100
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Desiccant box for AMS.
The slim version support 44mm X 44mm X 13mm hygrometer.
-----------
Here is the explanation to address some comments regarding the hole orientation.
The reason I chose horizontal orientation, which results in many bridges when printing, is that in my experience, small and thin vertical parts are very difficult to print. They often experience heat creep or shaking during the printing process, and even if you print them very slowly, the print quality is not always guaranteed.
On the other hand, while printing bridges sounds challenging, it is actually much easier if the bridge length is taken into consideration in the design phase.
I hope that my explanation helps.
