1 / 2
Visor Frame Covid19
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Properly configured https://3dverkstan.se/protective-visor/protective-visor-versions/ for Prusa MK3s.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 85
- Makes
- 0
- Views
- 536
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Public Domain
Properly configured https://3dverkstan.se/protective-visor/protective-visor-versions/ for Prusa MK3s.
As described at https://3dverkstan.se/protective-visor/protective-visor-print-guide/ it's very important that there is no infill as that will weaken the part. One can force slicer to do that using Layers and Perimeters setting.
Print instructions
If slicing from STL for .4 nozzle:
- Set outer perimeters to 5 under Print Settings > Layers and Perimeters
- Set layer hight to 0.25 under Print Settings >Layer height
Can be printed at 180% speed in 30min.