BTT PI4B Adapter case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed case for the PI4B CB1/CM4 adapter.
- Rating
- 4.5 / 5
- Likes
- 54
- Downloads
- 785
- Makes
- 8
- Views
- 3,210
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the original PI4B Adapter case from Bigtreetech.
Changes:
Chamfer near the DSI port exit to avoid supports.
Holes where to screw the CB1 and heatsink, both with M2.5 nuts or screw on plastic.
Bigtreetech logo/name raised to the model surface to avoid supports (inside supports are still needed).
EDIT: Only needs (paint on) supports where the closing screws sit and under the wifi antena cut. Bigtreetech word should be placed on bed. Rotate if needed. Check last picture.
Hardware needed:
To close the case:
4 x M2.5x12
To fix the CB1:
If screw on plastic:
4 x M2.5x12
Is bottom nuts:
2 x M2.5 x 14
2 x M2.5 x 12
Original design:
https://github.com/bigtreetech/PI4B-Adapter/tree/master/PI4B%20Adapter%20%2B%20CB1%20shell