1 / 14
Hampelmann ich meine Bärchen UPDATE 27.03.2025 Fell — image 1
1 / 14

Hampelmann ich meine Bärchen UPDATE 27.03.2025 Fell

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Jumping Jack I mean bears Update 27.03.2025 Bärfell

Rating
5 / 5
Likes
17
Downloads
129
Makes
1
Views
881
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Die 7 Teile ausdrucken (oder 8 mit Zugring). 

Material am besten ABS oder PLA (PETG oder PC geht natürlich auch)

Füllung min. 15%

Rückseite 01 flach hinlegen, die 4 Gliedmasse einsetzen ( sollten beweglich sein). Zum eventuellen schmieren kann ein wenig mit wasser verdünnte flüssige Seife verwendet werden.

Die Zahnstange 01 sollte vor dem einsetzen unten mit einem Zugbändchen versehen werden. (und optional an der oberen Öse mit einem sehr kleinen Haushalts-Gummi-Band welches über die freie Achse im Kopf eine bessere “Rückbewegung” ermöglicht, dies sollte nicht erforderlich sein ).

Die Vorderseite 01 nachdem die 4 Gliedmasse und die Zahnstange einsetzt sind mit den rückseitigen Stiften in die Hohlwellen einsetzen. Diese Stifte sind eine leichte Spielpassung. Je nach Drucker-Kalibrierung und Quallität sollte die Vorderseite 01 leicht zu fügen sein, für dauerhaften Halt ist eventuell ein wenig Klebstoff erforderlich.

Nachdem man jetzt noch einen Befestigung-Faden oben am Kopf angebracht hat kann das Hampelmänchen (Bärchen) aufgehängt und “losgehampelt” werden.

Viel Spass ;-)

 UPDATE 27.03.2025 Fell: Ich hab nochmal 6 Bilder in einem ZIP hochgeladen, die wenn sie auf einem handelsüblichen Papier-Farbdrucker gedruckt werden auf der Frondseite das Aussehen noch verfeinern können. Es sind 3 Fellfarben und jeweis eine mit ovalem Schriftfeld für Name oder herzlichen… oder so.

Auf 76 mm höhe skalieren

Am besten auf einem selbstklebenden Etikett z.B. :

https://de.aliexpress.com/item/1005006969785039.html?src=bing&aff_short_key=UneMJZVf&aff_platform=true&isdl=y&albch=shopping&acnt=135095331&isdl=y&albcp=412811410&albag=1305120665653977&slnk=&trgt=pla-4585169653841428&plac=&crea=81570116517484&netw=s&device=c&mtctp=e&utm_source=Bing&utm_medium=shopping&utm_campaign=PA_Bing_DE_PLA_PC%2FM_SFFC_0-7_Ecpc_20240613&utm_content=customlable1%3D7&utm_term=A4%20Ediketteb&msclkid=bf1375c600fa11c1389d12271991bba5&gatewayAdapt=glo2deu

Nachtrag: Da die Rückseite eine plane Fläche hinter der Mechanik hat kann man ihn auch z.B. mit doppelseitigem Klebeband auf eine ebene Fläche kleben.

-----------------------------------------------------------------------

Google translates:

Print out the 7 parts (or 8 with pull ring).

Material best ABS or PLA (PETG or PC are of course also possible)

filling at least 15%

Lay back 01 flat, insert the 4 limbs (should be flexible). A little liquid soap diluted with water can be used to lubricate.
The rack 01 should be fitted with a drawstring at the bottom before it is inserted. (and optionally on the upper eyelet with a very small household rubber band which allows a better "return movement" via the free axis in the head, this should not be necessary).
After inserting the 4 limbs and the rack, insert the front 01 with the pins on the back into the hollow shafts. These pins are a slight loose fit. Depending on printer calibration and quality, Front 01 should snap together easily, a little glue may be needed for permanent hold.
After you have now attached a fastening thread to the top of the head, the jumping jack (little bear) can be hung up and “start jumping”.

Have fun ;-)

Update 27.03.2025 Fell: I uploaded 6 pictures in a zip that can still be refined on a standard paper color printer on the frond page. There are 3 fur colors and one with an oval typeface for name or warm ... or something.

Scalate to 76 mm in height
Best on a self -adhesive label e.g.:

https://de.aliexpress.com/item/1005006969785039.html?src=bing&aff_short_key=UneMJZVf&aff_platform=true&isdl=y&albch=shopping&acnt=135095331&isdl=y&albcp=412811410&albag=1305120665653977&slnk=&trgt=pla-4585169653841428&plac=&crea=81570116517484&netw=s&device=c&mtctp=e&utm_source=Bing&utm_medium=shopping&utm_campaign=PA_Bing_DE_PLA_PC%2FM_SFFC_0-7_Ecpc_20240613&utm_content=customlable1%3D7&utm_term=A4%20Ediketteb&msclkid=bf1375c600fa11c1389d12271991bba5&gatewayAdapt=glo2deu

Addendum: Since the back has a flat surface behind the mechanism, you can also stick it to a flat surface with double-sided adhesive tape, for example.

Tags