High Republic Inspired Lightsaber
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lightsaber with triple fold-out crossguard and collapsing blade. Design by Velocisniper
- Rating
- 0 / 5
- Likes
- 41
- Downloads
- 141
- Makes
- 0
- Views
- 1,117
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution
This was modeled after High Republic Inspired Lightsaber With Fold Out Triple Crossguard by Velocisniper.
While the crossguard is closed, the emitter is blocked off, which prevents the blade from extending.
The pommel is modified to hold a mini flashlight. I have modeled it for a Lumintop EDC01 Flashlight, which is 66*14.5mm and runs on a AAA battery. (Unfortunatly the filament I've used isn't fully opaque and the flashlight shines through the hilt.) There is also a pommel without this modification.
Print Instructions
Hilt
The hilt consists of 19 pieces, numbered 1 to 19. The file-names for each piece contain the color this piece is supposed to be printed in - silver, gold or any. Everything was printed at 0.2mm layer height, unless stated otherwise.
Many pieces require supports. The easiest way is to just switch on supports for every piece and let your slicer decide where to add them. The only exception is piece 10. It does not require supports and the auto-generated supports can clog up the thread, so you should disable supports for this piece.
Print 3 copies of 2_gold.
If you want to use a flashlight, print pieces 17_any_flashlight, and 18_silver_flashlight and do not print 18_silver_closed. The piece 17_any_flashlight is printed in vase mode, at a low layer height (0.1mm) with no bottom layers.
If you do not want to use a flashlight, print 18_silver_closed. Do not print 17_any_flashlight, or 18_silver_flashlight.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#