Medical Face Shield
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.28 – €1.57 net (excluding VAT)
For file: 1xshield-k325b_03mm_pla_mk3smmu2s_1h22m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.43 excluding VAT (range midpoint).
- Weight reported by the author
- 19 g
- Print time reported by the author
- 1.37 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Low cost, fast (80-90 min) printed parts for a lightweight medical face shield. Fits over glasses.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 33
- Makes
- 0
- Views
- 661
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Low cost, fast (80-90 min) printed parts for a lightweight medical face shield. Fits over glasses.
Only other parts needed are 8.5x11" overhead transparency film and hair elastic.
Standard 3 hole punch the transparency film.
Skinny parts make sticking to the plate difficult.
1 or 2 units fit on MK3S and 1 on Mini.
Make extra washers since they are fiddly and easy to lose.
Choices of use in declining order: 1- dispose after single use, 2- replace the film, 3- don't use for 4 days, 4- wipe down with alcohol. Reuse immediately only if you have to. PLA and PETG melt in an autoclave.