1 / 4
i3 Pro B (Geeetech) E3D Hemera Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter plate to mount an E3D Hemera extruder to the Geeetech i3 Pro B.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 277
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The adapter plate can be mounted with the 3 original screws (2xM4) and an additional M3 screw. There's holes for the threaded inserts to mount the adapter plate, these should face back, the other 4 holes are for M3 threaded inserts facing to the front where the Hemera is to be mounted.
There's also a mount point for a Duet IR height sensor, which is obviously optional but if used is meant to be used with 2xM2.5 threaded inserts facing forward.