1 / 7
Dryer Vent With Auto Cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small vent for an old dryer
- Rating
- 5 / 5
- Likes
- 77
- Downloads
- 501
- Makes
- 3
- Views
- 2,033
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- GNU General Public License v3.0
Printed with PETG.
Connects to a 100mm diameter tube.
The base requires build plate supports. See update below.
The frame can use build plate support as well, but it's expected to work without it.
Assembly:
- Put the flaps on the base, and cover with the frame (consider using a bit of glue to connect the frame to the base. That should help with the assembly).
- Push the tube of the base through a hole in the window net.
- Connect the base_connector to the base, from the other side of the window.
- Use 4 M3 screws to connect all parts.
Update:
Splitting the base into 2 separate parts will avoid the need for supports for it.
I've added base_v2.stl with the split. Note that it's untested.