1 / 3
Filament Chip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament testing chip to test colour, different layer heights, ironing and bridging
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 121
- Makes
- 1
- Views
- 1,186
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This filament chip can be used to showcase different useful properties of filament in a relatively small form factor (50x50mm)
Features
The following features are shown:
- colour of the filament
- transparency test (0.2mm to 1mm layer height) with and without ironing
- retraction test (1mm to 6mm holes)
- top surface finish
- small spot with ironing enabled
- rest with ironing disabled
- bridging test (small spot on the bottom side)
Printing Instructions
The model is provided as a .3mf file and contains all the necessary settings to print the model. If you want to change them, feel free! However, the following settings should be set to make the transparency and bridging test accurate:
- layer height: 0.2mm
- infill: 100%
Container
A container to store all the filament chips is already in the making. Stay tuned! :D