1 / 3
Peak Design Capture Clip Water Bottle Attachment
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount to attach a Peak Design capture plate to an old style Hydroflask 32oz or 40oz bottle.
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 61
- Makes
- 1
- Views
- 2,159
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Introduction
This is a mount designed to attach a Peak Design capture plate to an old style Hydroflask 32oz or 40oz wide mouth bottle.
Compatibility
This design is intended to be used with a lid that is only removed for refilling, not the standard screw top flex cap. This is also only compatible with any of the old design of HydroFlask bottles sold before 2020 (with the rolled mouth flange).
Print Advice
- PETG is ideal for this design
- Use a minimum of 3 perimeters for strength
- Print with the large circle face down
- Use print supports on the outside of the shoulder of the bracket
Assembly
Using (1)ea ¼-20 jam nut to screw the peak design capture plate onto the bracket in the hex hole.