Samsung Galaxy Watch5 Pro Charging Stand Cradle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Since the new charging puck not only features USB-C instead of USB A plug, 10W instead of 5W (if connected to a PD…
- Rating
- 3 / 5
- Likes
- 17
- Downloads
- 219
- Makes
- 3
- Views
- 1,550
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
Since the new charging puck not only features USB-C instead of USB A plug, 10W instead of 5W (if connected to a PD capable USB-C charger) but also a smaller footprint / diameter, I had the choice to stuff some sort of thick glue tape inbetween or fill it up otherwise or to design a new stand (or base it off an existing one - which I did: thanks Stefan042 and JSC, https://cults3d.com/de/modell-3d/gadget/samsung-galaxy-watch4-charging-dock) ...
Well, introduction aside, this is new:
- adjusted to fit the Watch5 Pro
- not multi-part anymore
- cable tunnel in the bottom
- more polygonal shape
- click-in puck design (depends heavily on your printer/print settings/filament though), hot glue worked fine with the Watch4 stand btw, any type of even extra strong double sided tape did not...
The "edgy" design is more polygonal, basically I tried to create a smaller print but also to prevent my Cura 5.1 slicer to place the z seam in the front due to the rounded back.
In hindsight I should have tried to modify the Fusion file, instead I cobbled it up in 3D builder. Meh ;)
Category: Mobile Phone