Sovol SV01 Pro FanDuctX2

FanDuct to help cooling your prints. It uses two 5015 blower fans, that should be enough to cool your prints.

be carefull, you need to modify your printer.

1. to add the second blower fan, you need a y-adapter or add a seperate wire
2. you need remove the cl-touch from its original position and add it to the new printed mount. i used two M3 16mm.
3. the bl-touch mount need to be glued onto the left fan duct mount. (see pictures)
4. screw or glue the fan to the respective bracket
5. attach the right fanduct mount to the position, where the original bl-touch mount was. I recommend to add the printed spacer between the fancuct mount and the metal plate.
6. before you add the left fancuct mount, look at the square metal plate. you´ll see three holes with m3 thread. add one m3 10mm screw to the upper left hole, with just one turn.
7. now you can hook in the fan bracket and add the second and the third screw.
8. the new cl-touch offset should be x=11 y=-50

this fanduct should also work on the new SV05, but i´m not able to test it myself.