1 / 4
Soap dish / tray / holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Soap dish / tray / holder
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 94
- Makes
- 3
- Views
- 421
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
Remember to add infill to between the actual bottom and the inner bottom (i.e. don't print with 0 % infill). The side walls are likely to print fine if empty.
The mockup soap in the figure is 82 x 55 x 27 mm
Printed fine: Prusa Mini, PLA, 0.4 mm nozzle, 3 wall layers, 15 % lightning infill, 0.2 mm layer height + 0.1 mm modifier for the very the top 1 mm (for side wall top curvature)