1 / 1
PrusaSlicer profile for Bambu Lab X1 Carbon (0.4mm) BS 01.02.00.09 — image 1

PrusaSlicer profile for Bambu Lab X1 Carbon (0.4mm) BS 01.02.00.09

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A basic printer profile for the Bambu X1 Carbon (with 0.4mm nozzle). Based on Bambu Studio 01.02.00.09.

Rating
4.8 / 5
Likes
172
Downloads
5,513
Makes
3
Views
28,682
Reviews
5

Updated at source:

Model information

License
GNU General Public License v3.0

This printer profile is a copy of the profile from Bambu Studio (01.02.00.09), with the placeholders and variables adjusted to fit the PrusaSlicer style rather than the Bambu Studio style.

The linear advance (flow calibration) is not included as it requires hardcoding for a specific filament/printing profile, or placeholders for the start G-code that don't exist in Prusaslicer.
ABL is included and will happen for every print.

The start G-code has also been slightly modified to fix a bug, and the layer change code adds timelapse commands.

The machine profile file presumes for the bed image that you're on Windows, and that you have Bambu Studio installed in the default location. You'll need to correct this if that's not the case.

Oh, and there is no protected keep-out zone bottom left, so don't put models there unless you've performed the physical modifications to use that space (https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations), or you might break things/accidentally cut your filament.

Use of this profile is totally at your own risk of course.

These files were created originally by Bambu Lab as part of Bambu Studio (https://github.com/bambulab/BambuStudio), which is based on PrusaSlicer (https://github.com/prusa3d/PrusaSlicer) so are released under the same license.

Tags