Prusa Face Shield - Stack ver.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
1h 20min per pcs Stacking versions of Prusa Protective Face Shield - RC3 A prototype face shield that we developed.
- Rating
- 4.577 / 5
- Likes
- 139
- Downloads
- 35,255
- Makes
- 30
- Views
- 104,064
- Reviews
- 52
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial
1h 20min per pcs
Stacking versions of Prusa Protective Face Shield - RC3
A prototype face shield that we developed. In three days, we went through dozens of prototypes and two verifications with the Czech Ministry of Health.
Provided G-codes are only for Original Prusa i3 MK3/S printers. Do not run the G-codes on other printers. Risk of damage.
We provided two options, including reinforcement parts:
- 4 pcs on the print bed (2 stacks, each with 2 headbands)
- 8 pcs on the print bed (2 stacks, each with 4 headbands)
Version RC3.2 - 1. 4. 2020
We uploaded new 3MF files and G-codes that have increased infill in the spot, where the visor goes away from the headband. The STL file remains unchanged.
</br>
Version RC3.1 changelog
Changes from RC3
</ul>
</br>
The printer will be running at increased speeds. Expect louder operation and make sure your printer is in good shape before running this G-code. Check the Maintenance guide.
Print instructions
Supports are included in the model.
Print with at least 2 perimeters, and 5% infill. The model is optimized for a layer height of 0.25mm.
Print it from PETG, headbands from other material can be brittle with these print settings.