T-slot Track - Custom .75 x 1.15 in
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printable t-slot tracks.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 42
- Makes
- 0
- Views
- 448
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a custom t-slot track. It will be used on a crosscut sled for my table saw (will post photos soon). I can print 3' of this for a few dollars vs $30+ for an aluminum track.
The tracks print around 6" and have two tapped screw holes. The slot is designed to be used with an M8 bolt (5/16 should work too). There are two files. One track can be used with just a bolt. The other has a slightly wider slot in which I use an additional washer inside the track.
I print these with 0% infill but with 4 or 5 walls. This will give it more than enough rigidity. I don't have to clamp or tighten anything too tightly to this track, so PLA has worked well.
Print Settings
Printer Brand:
Monoprice
Printer:
Maker Select Plus
Rafts:
No
Supports:
No
Resolution:
.28 mm
Infill:
0%
Filament: ZYLtech PLA Uncle Jessy's Gun Metal Silver