1 / 1
Mosaic Palette 2.0 to Standard PTFE adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
you will need to print one Knurled nut and one adapter.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 54
- Makes
- 0
- Views
- 494
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
you will need to print one Knurled nut and one adapter.
Both print without support - adapter has some sacrificial bridging to remove with a small blade.
thread a standard PC4 M10 fitting into one end, knurled nut goes over tube using provided Oring
makes connecting a P2 to any printer with a PTFE inlet connection (BMG, MK3, Hemera etc etc)
was printed at a 0.16mm layer for strength/fidelity.
Any questions please contact me Via twitter @mad_monkey01
Print instructions
Print for max strength based on your preferred layers/printer