1 / 1
Wyse converter enclosure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an enclosure for my Wyse-converter PCB
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 190
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is an enclosure for my Wyse-converter PCB that's utilising Soarer's Wyse converter firmware.
Hardware
6x M3 4-5mm heat inserts
4x M3x16mm screws
2x M3x4mm screws
Assembly
Use M3x4-5mm heat inserts and install them into the bottom part of the case. Insert the wyse-converter PCB inside, fasten it with the two 4mm M3 screws, place the top on and screw that on with the longer M3 screws.
This enclosure is fitted to be used with regular, tall-ish DIP sockets for the Pro Micro.
PCB
Get the PCB from my GitHub repo: https://github.com/pohjolaworks/wyse-converter