Maze Cube (with Tunnels)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.38 – €0.46 net (excluding VAT)
For file: Tunnel.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.42 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 31.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A 3D printed cube where all of the sides are one inter-connected maze, with tunnels connecting them underneath.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 51
- Makes
- 0
- Views
- 796
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution — Share Alike
A 3D printed cube, where each face serves as a maze for a trapped ball. Each face connects to the adjacent ones, and tunnels run beneath the faces, allowing you to move from the center of one to another.
This particular maze was a collaboration with a friend who was completing a senior project in Graphic Design. The maze sports his name, Liam, as the centerpiece.
To construct the cube, 4 Sides, 1 Base, and 1 Top all need to be printed and placed face to face. There are unique ‘flats' on the back for each print that guide the orientation. Side prints have 2 flats, the Top print has 0 flats, and the Bottom print has 4 flats. When placed side to side, each piece should fit together snugly. The tunnels can be used to connect the holes and create paths through the cube. Use super glue to solidly bind together the assembly.
I would recommend using acrylic to seal the cube shut and to provide a nice finish. This can also serve to seal the puzzle ball inside.