Baby Change Station Rail
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A baby change station safety rail for grounded maker-parents. It makes sure your baby stays put.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 33
- Makes
- 1
- Views
- 795
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution
A baby change station safety rail for grounded maker-parents.
It makes sure your baby stays put.
Or at least has something to grab on to if they've started to move a bit.
Here's a fun little video session I made of building it:
Part 1: https://youtu.be/Yh4RCveVTh4
Part 2: https://youtu.be/q2CUUd5WNSc
All you need is filament, some rods and some small screws.
If your rods have a different diameter, you can scale the prints.
And feel free to help other parent friends in need ;-)
Hope you like it!
Print instructions
Attached you will find the STL where all elements fit nicely on the build plates.
You will also find a picture with all rod measurements. You can adjust these to fit your exact pillow.
Feel free to remove the ones you don't need.
Using a .4mm nozzle, please make at least 3 perimeters.
If you plan to use it for kids more than a year old, you might want to beef up the slicing and use petg to make it playground-strong :-)
Happy printing!