1 / 7
5015 Clear Fan Rear Housing
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printed in clear PETG to allow LEDs to shine through.
- Rating
- 5 / 5
- Likes
- 69
- Downloads
- 197
- Makes
- 4
- Views
- 3,422
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Experimental and untested. Proceed at your own risk.
How to:
- Print in clear PETG. Clean of strings well.
- Take a GDSTime 5015 fan and cut away everything down to the PCB (carefully). Note that the back housing seems to act as a “cap” to the axle, exposing a clip and some lubricant. Be careful and work slowly as to not put too much pressure on the motor and cause damage.
- Glue the PCB into the back housing. Clip gently (the clip I used puts about the maximum amount of pressure I'd want on this thing as to not damage the motor)