IMX258 3840x2160 4k 120 degree camera mount case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for the IMX258 3840x2160 module
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 1
- Views
- 386
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I This is for the following product
https://www.aliexpress.com/item/1005004407649001.html?spm=a2g0o.order_list.0.0.8ec01802ioh7Xm
Mounts to any 20x20 extrusion via the modular case parts.
The case is held together via 4 M2 self tapping screws, the case is then bolted to the articulating arm using 2 M2x8 self tapping screws. Ensure you fasten the two internal screws first, there is two rows so you can raise the case a little higher or lower beyond the mount range.
You will need to use a 5mm heat insert into the articulating arm so that it can be clamped against the mount using the 30mm x 3mm bolt.
I would suggest this is printed at 0.1mm layer height and 20% infil for that fine finish and tolerance for the bolts/screws along with the board fitment.
