58mm magnetic espresso dosing funnel
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.63 – €1.99 net (excluding VAT)
For file: 58mm magnetic funnel_0.1mm_PLA_MK3SMMU2S_2h19m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.81 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 2.32 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Useful for dosing espresso without a mess, especially if using a distribution tool, or single dosing.
- Rating
- 5 / 5
- Likes
- 52
- Downloads
- 341
- Makes
- 4
- Views
- 2,778
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Public Domain
This funnel has an outer lip and uses 16 magnets (4mm diameter, 2mm height) to hold onto the portafilter basket.
It prints upside down without supports.
Should fit most 58mm baskets. The bottom lip has a 70.2mm clearance, with a 58mm inner diameter so you can tamp with it on.