Nail brush
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.23 – €1.51 net (excluding VAT)
For file: brush_02mm_petg_mk3s_1h41m_7.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.37 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 1.7 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
important when hand cleaning that you whipe all viruses below your fingernails.
- Rating
- 4.333 / 5
- Likes
- 46
- Downloads
- 225
- Makes
- 1
- Views
- 2,217
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Public Domain
important when hand cleaning that you whipe all viruses below your fingernails.
Print instructions
set bridge flow ratio to 1 so you get enough material for the brushes. If you want to decrease stiffness of the brush reduce to 0,7 - this was the lowest amount which gives me good brushes. I used PETG and PLA - both materials work fine. PLA gives a light stiffer brush.
So this model can be used for PLA and PETG. Make sure you have recognition of small walls active.
PETG can be cleaned in a dishwasher.