1 / 1
Y Axis Carriage
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printable carriage compatible with LMU8, MGN12C and MGN12H.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 157
- Makes
- 0
- Views
- 1,484
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
Prototype.
Print this with Prusament polycarbonate carbon fiber filament to achieve require stiffness. You will need to anneal this carriage in your oven at 285*F for two hours to acheive 130*C heat resistance which is higher than the print bed temperature to prevent warping while in service.
100% infill, 0.18mm layer height. 180g of filament (original MK3 carriage 300g)
Use 30 minute epoxy or JB weld to bond the halves together with 4x M3 25mm bolts.