Adjustable Z Stop Spacer for Sidwinder X1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A spacer that let's you use the spare T-nut to make the Z stop adjustable
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 26
- Makes
- 0
- Views
- 248
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution
Some upgrades (changing heat break, bed, etc) require you to adjust your Z stop sensor to account for the change in height. This is a (2mm) spacer that lets you use the spare m3x11mm T-nut that came with the printer to mount the Z stop.
I recommend scribing some lines in 1mm increments next to the sensor to help with repositioning it. I used some tape and a paint pen to put a reference on the sensor.
Recommend printing in ABS or PETG if you use an enclosure, and upping the top/bottom layer count so that it's solid. Make sure you catch the T-nut if you drop it through the slot, and if you disconnect your Z stop, don't forget to plug it back in!
This is a slight variation from the model @BigDan1190 created.